Always & Forever

Wedding cards are always hard for me to make, but when it is a fellow stamping friend who gets married, that makes it even harder. No pressure, right? :-) I chose the color So Saffron since it was one of her wedding colors. I'll definitely be trying this card again with different colors; I think pretty much any shade of pink or red would also make a gorgeous anniversary, valentines, or wedding card.

Anyway, here are some of the creative details: I stamped the heart from the set Always twice on Glossy White card stock using Versamark ink. I embossed both hearts with clear embossing powder. Next I sponged on So Saffron ink and then cut out both hearts--one outside of the dots, one along the line of the heart. The picture below shows how I used dimenionals between the two hearts.

I ran the white layer through the Big Shot using the Perfect Details texturz plate (my favorite texture plate!) and then tore along the edges. There are also dimensionals behind this layer. The ribbon is the 5/8" Whisper White satin ribbon. Finished card size is 5" by 5".


Stamps: Always
Ink: Versamark ink, So Saffron
Paper: So Saffron, Whisper White, Glossy White
Accessories: 5/8" Whisper White satin ribbon, Clear EP, heat tool, embossing buddy, sponge, dimensionals

Fall Circus

It's been cooling down a bit here in Houston (not that it's cool yet, just cool-ER) and so the other day I pulled out some fall colors to play with and this is what I came up with. Very simple card that can be put together in 10 mins or less.

Along the left side I used 3 of the stamps from the set Circle Circus and the sentiment is from the set Teeny Tiny Wishes. The white layer is up on dimensionals.

Stamps: Circle Circus, Teeny Tiny Wishes
Ink: Really Rust, So Saffron, Chocolate Chip
Paper: Really Rust, Whisper White
Accessories: 5/8" Chocolate Chip Grosgrain Ribbon, Corner Rounder Punch, dimensionals

Serene Shaker

This post is a combination of a lot of things. . . . It started as a mini tutorial for the shaker card I posted (HERE or just scroll down to the previous post) and grew. :-) Now it also includes a mini tutorial for shimmer paints.

You can find Shimmer Paints in the Holiday Mini Catalog. Shimmer paints come in 3 different colors: Champagne Mist, Frost White, or Platinum. Today I'll be showing Frost White.

So how do you use Shimmer Paints? There a several ways to use these versatile paints. Also note that this is a "little goes a long way" product. 1. The easiest is to shake the bottle, take off the cap and use a sponge dauber to apply it directly to your project. 2. Or, use the sponge dauber and gently apply it directly to your stamp.

3. Or as I've shown below, you can ink your stamp with a color, then apply the shimmer paint on top, and then stamp--giving you a colorful and subtly shimmery image. Easy huh? Just be sure to clean your dauber in between stamping so as not to mix color into your shimmer paints.

4. If you want to stamp several of the same image, (without cleaning the dauber in between each stamp) just mix a little shimmer paint and a drop or two of reinker. You can see the leftovers here of my shimmer paint/Night of Navy reinker mix in the top of my ink pad. (Please just be sure to clean out the top of the lid--baby wipes work well--before you close the ink pad.) I used the sponge dauber to apply the mix directly to my stamp. Very pretty effect! I have a feeling I'm going to be using these paints a lot!

Ok, so now I have an image--I stamped one of the snowflakes from the set Serene Snowflakes from the Holiday Mini Catalog. I tried to photograph the 'shimmer' part of the paints; this is the best I have.

Now for the shaker part. . . . I used my Circle Scissors Plus to cut a 2" circle. Without moving the cutter, I cut a 2 1/2" circle. That gives my my 'frame'. I then cut out a 2 1/2" circle of Window Sheet (medium). Tip: Before you adhere the frame and the Window Sheet together, make sure to clean the Window Sheet with a window cleaner (such as Windex). This not only gets rid of any smudges, but also leads to less static (ie beads sticking to the window sheet) inside your finished shaker. The next step is to add the dimensionals.

I don't remember exactly how I figured this out, but now that I have, I always save the long sides of my dimensionals sheets--as seen below. I take those long strips and carefully put them around the edges of the 'frame'. Next I put in the Micro Beads. Note: I used less than 1/4 tsp of beads. The last step is to peel the backing of the dimensionals and put the stamped image (image side down) on top of the dimensionals--like making a sandwich. Your 'shaker' is now ready to be added to a project using Sticky Strip.

The card at the top was inspired by a Sketch Challenge found at Splitcoaststampers. All of the stamping on the card was done using the shimmer paint/Night of Navy reinker mix. The sentiment is from the set Best Wishes & More. Finished card size is 5 1/2" by 5 1/2".

The card below uses the exact same shaker element but was made for the CAS31 challenge also over on Splitcoaststampers. As you can see it is a very simple card--but still fun because you just can't resist shaking it. :-)

Stamps: Serene Snowflakes, Best Wishes & More

Ink: Night of Navy

Paper: Night of Navy, Whisper White, medium Window Sheet

Accessories: Shimmer Paint, Circle Scissors Plus, Glass Mat, Micro Beads, dimensionals, Corner Rounder punch, Whisper White Organza Ribbon

Rock-A-Bye Baby

Hello again! This is a shaker card I've had in my files for awhile. . . . I wanted to wait to post it until I could make a tutorial, but here it is tutorial-less. If that can even qualify as a made up word. :-) Hopefully I'll get a tutorial up soon. Anyway, here it is!

The set I used is called Nursery Necessities. This set is part of the Growing Up promotion that ends in a few days (Aug 31). See HERE for details. If this stamp set (or any other from the Growing Up section of the catalog) is on your wish list, now is the time to purchase it!

Finished card size is 4 3/4" by 4 3/4". Now for a close up of the card:

Stamps: Nursery Necessities

Ink: Whisper White craft ink, So Saffron, Brocade Blue, and Close to Cocoa markers

Paper: Bashful Blue, Brocade Blue, So Saffron, Close to Cocoa, Always Artichoke, Whisper White, Window Sheet

Accessories: Clear Micro Beads, Bashful Blue brads, Circle Scissors Plus, dimensionals

Top Note Bag Tutorial

As promised--a tutorial for the Top Note Bag! You can see the original bag that won Stampin Up's July Art Contest (Flutter by Butterfly) HERE. I had quite a bit of fun making another bag. :-)

Begin by cutting 8 Top Note Dies. (I used Kraft paper here.) These will become the front and back panels of the bag. Next you will need to cut 4 partial Top Note Dies that become the sides of the bag. To do this, Take a sticky note and place it directly on the Die to mark your place. I placed mine approximately 1 1/2" away from the side tip/edge of the Top Note. The exact measurement isn't important as much as the consistency. If you would like a wider bag, just place the sticky note further away from the edge.

Line up your folded card stock with the edge of the sticky note. I used a piece of (approx) 3 1/2" by 4" Kraft paper (scored down the middle). Run the Top Note Die through the Big Shot to make the first side piece. Repeat 3 more times making sure to the keep the sticky note in the same place so that all of your side pieces are the same width.

So after you've cut 8 full Top Notes and 4 partial Top Notes, stamp or embellish as desired. Here I ran the Top Notes through the Big Shot again with the Perfect Details Texturz Plate, sponged with Soft Suede Ink, and used my Soft Suede marker around the edges to finish the stitching on the Top Note.

Next score along the edges of the Top Notes. Again the exact measurement is not as important as the consistency of the scoring measurements. I lined up the 'valley' of the Top Notes with the black border of my scorer and then scored.

Score along all four sides of 4 of the full Top Note dies, and 2 of the partial Top Note Dies. On the other 4 full Top Note dies, score along both short edges and only 1 of the long edges. On the other two partial Top Note dies, score along both of the long sides and only 1 of the short sides.

Cut out the little 'square' sections wherever there is an intersection of scored lines. (4 per bottom Top Note and 2 per top Top Note.)

Adhere the Top Notes together as shown in the pictures below using a strong adhesive. I used Tombow Mono Multi (remember a little goes a long way).

Now you have the main part of the bag together! To make the bottom of the bag, place it on a piece of card stock (here I used Soft Suede) and trace along the bottom. You'll have to push down lightly with one hand and trace with the other. Another note, I didn't force the bag to a perfectly rectangular shape, I let it bow out a bit on either side to give it a more natural shape.

Cut out your pattern and adhere to the bottom of the bag. Trim if necessary.

Depending on what you want to use the bag for, you may want to add supports to the bottom and/or sides of the bag. If the bag is just to look pretty :-) you may not need any supports. Here I used 4--2" by 1" pieces of paper scored down the middle for supports. After you've added as many supports as desired, prepare your handles. Here I used approximately 11" of Twill Tape (3/4") with 1/2" Soft Suede Polka-Dot Grosgrain ribbon adhered (with Sticky Strip) on top.

Adhere your handles. If you are going to use brads, grommets, etc add those now. After you adhere the handles, start adding the inside of the bag.

Each bag may be a little different (depending on how you scored), but for the insides of this bag I used two 8" by 5 3/4" pieces of Soft Suede card stock and two pieces of 2 1/4" by 5 3/4" card stock. To make the bottom piece, I turned the bag upside down and traced the pattern. I cut that out and then trimmed down as necessary until it fit in the bottom of the bag.

Now embellish as desired! Here I used the Circle Scallop Punch, Boho Blossoms Punch, Antique Brass Build-A-Brad, and Antique Brass brads.

Finished!

Stamps: Trendy Trees (for dots on Build-A-Brad)

Ink: Soft Suede ink and marker

Paper: Kraft, Soft Suede, So Saffron, Very Vanilla

Accessories: Top Note Bigz Die, Big Shot, Perfect Details Texturz Plate, Scallop Circle Punch, Boho Blossoms Punch, Antique Brass Build-A-Brad, Antique Brass brads, sponge, dimensionals

Happy News!

Don't you just love happy news? A little while back I found out that I won Stampin Up's July Art Contest in the Flutter by Butterfly category! I was so excited. :-) Not only did I get to choose any 3 stamp sets from the catalog, my project is published in Stampin Success--the monthly magazine for demonstrators. Since the magazine went online today, I thought I would share my project with you!

I actually made this project quite some time ago--shortly after I made this butterfly bag. As you can see the bag grew a little bit. :-) I wanted to create a bag that was made entirely of Top Note Die cuts, and this is what I came up with. All of the brown you see on the bag (handles, inside, butterfly) all use the faux suede technique. There is also a pocket on the inside.

Note: I'm creating a tutorial for the bag that will be posted soon.

Ink: Chocolate Chip marker (for stitching detail)

Paper: Chocolate Chip, Pink Pirouette, Bella Birds DP, White Vellum paper

Accessories: Chocolate Chip corduroy buttons, Pretties Kit, dimensionals, Big Shot, Beautiful Butterflies die, Top Note die, thread